Engine Ice 12930 Coolant System Flush and Clean 1/2 Gallon

Description: Engine Ice Coolant System Flush and Clean is an easy-to-use product designed to help maintain your cooling system and its components. Maintenance is less expensive than repair. Flushing your coolant system will give you peace of mind against breakdowns and corrosion. All liquid-cooled vehicles can benefit from a coolant flush each time the coolant is changed. This flush will remove the old coolant and any chemical residue left behind and effectively remove the sludge, mineral scale, and contamination that occurs as coolant ages. A properly completed flush using Engine Ice Coolant System Flush and Clean will allow your system to operate at its highest level when you refill with the appropriate Engine Ice coolant of your choice. Ready to use - no mixing required. Removes corrosion, scale, grease, rust and sludge. Safe for aluminum. Compatible with typical cooling system components. Maintains a high-performance cooling system. For use with or compatible with most brands of coolant/antifreeze. Safe for metals found in cooling system. Effective at removing contaminants left behind from other coolants. Excellent for use in most cooling systems: Motocross Bikes, Enduro Bikes, Street Bikes, Adventure Bikes, Sport Bikes, Cruisers, Baggers, Touring Bikes, Snowmobiles, ATV/UTVs, Side X Sides, all brands and types. Directions for use: 1. Completely drain your coolant system of all coolant. 2. Add Engine Ice Coolant System Flush and Clean to coolant system. 3. Run the vehicle until it achieves typical operating temperature (usually about 10 mins). 4. Flush the cooling system thoroughly with distilled water until all cleaner is removed. 5. Repeat steps 2-4 as necessary. 6. Once finished, fill with Engine Ice coolant. (If using a power flush machine, follow the manufacturer's directions).

Price: 24.75 USD

Location: Payson, Utah, 84651

End Time: 2024-08-31T14:44:28.000Z

Shipping Cost: 0 USD