Fluke Networks LIQ-100-IE LinkIQ™ Industrial Ethernet + Network Tester

Description: Subscribe to Our NewsletterFluke Networks LIQ-100-IE LinkIQ� Industrial Ethernet Cable + Network Tester Brand:Fluke NetworksModel No:LIQ-100-IERef No:5226628Our Model No:LIQ100IE Product OverviewFeaturesValidate cable performance to support Ethernet/IP, PROFINET, EtherCATIdentify miswired and split pairs on RJ45, M12X, M12D, and M8D terminated cablesIdentify connected switch information (Switch Name, Port Number, and VLAN)Install and troubleshoot PoE devices via Switch Negotiation and PoE Load TestsDocument work through LinkWare� PCGenerates analog or digital tones compatible with IntelliTone� Probes (not included) or Pro3000� (not included) to assist in locating cables in walls or telecommunications roomsBlink port light on switch to help identify connected switch portsCompatible with MicroScanner� PoE Remote Identifiers for Ethernet outlet identificationTouch sensitive gesture-based displayRechargeable Li-Ion batteryEasy Feature and Network Testing Upgrades via USB-C via LinkWare� PCCharging via standard USB-C portGeneral SpecificationsLanguages supported in UI: English (SW v1.0) Weight 1 lbs 6 oz (624g)Battery type: Lithium-ion, 3.6 V, 6400 mAhBattery life: 8 hours typicalBattery charge time: 4.5 hoursBattery charging temperature range: 0 �C to +40 �CPower adapter input: 100 to 240 VAC �10%, 50/60HzPower adapter output: 15 VDC, 2 A maximum; Class IIHost interface: USB type C Display 800 x 480 color capacitive multi-touchDimensions: 8.5 in. x 4.5 in.Operating temperature 0�C to 45�CStorage temperature: -20�C to 50�C (-4�F to 122�F)Operating relative humidity: 0% to 90%, 0�C to 35�C; 0% to 70%, 35�C to 45�COperating altitude: 4,000 m; 3,200 m with ac adapterVibration: Random, 2 g, 5 Hz-500 HzDrop: 1 m drop, 6 sidesActive Network DiagnosticsDiagnostic protocols: Link Layer Discovery Protocol (LLDP), Cisco Discovery Protocol (CDP), Fast Link Pulses (FLP)Nearest device diagnostics (if available through diagnostic protocols): Switch Name, Port Number, VLAN Name, Advertised Data Rates, Advertised DuplexPower over Ethernet (PoE) compatibility: IEEE 802.3af/at (SW v1.0), Hardware negotiation with signature resistance, Software negotiation with LLDP/CDPPower over Ethernet (PoE) diagnostics: Advertised Power Class (1 to 4) (SW v1.0), Advertised Available Power, Powered Pairs, Diagnostics for both Single and Dual signaturesPower over Ethernet (PoE) measurements: Loaded Voltage (V), Loaded Power (W) Port Blink Blink the light of the connected portCable Test SpecificationsTest port: Shielded 8-pin modular jack accepts 8-pin modular (RJ45) plugsCommissioning autotests 10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX, 10BASE-T, Wire Map (only); Test Speed: 6 seconds for lengths Cable types: Balanced twisted-pair cabling; Unshielded twisted-pair; Screened twisted-pair; 2-pair and/or 4-pairWire map-only tests: Document wire map, Length of each pair, Diagnose split pairs, User selectable T568A or T568B, User selectable crossover settings (Straight through, Half-crossover, Full-crossover); Test speed: 1 second for lengths Length (maximum): 305 m (1000 ft) Nominal Velocity of Propagation (NVP) User settableRemote ID locators: Use remote ID terminations to identify up to 7 unique ports or office outletsDescription The Fluke Networks LIQ100IE LinkIQ� Industrial Ethernet Cable + Network Tester is perfect for the challenging job that operational technology professionals responsible for maintaining and/or managing an industrial network have. On-the-spot problem-solvers, they are always planning for future enhancements to seamlessly upgrade the network to higher speeds, all while continuously troubleshooting and optimizing the current infrastructure. Fluke Networks' LIQ-100-IE provides a fast and robust tool to help expertly manage the network to keep it running smoothly and efficiently. By qualifying and troubleshooting cabling - the #1 cause of Industrial Ethernet problems - LIQ-100-IE can prevent and save hours of production downtime. The LIQ-100-IE Industrial Ethernet Cable + Network Tester verifies cable performance up to 10 Gb/s and solves network connectivity problems. Using frequency-based measurements, LIQ-100-IE provides distance to fault information along with a wire map of the cable under test. The LIQ-100-IE also performs nearest switch diagnostics to identify key network issues and validate switch configuration, eliminating the need for another device. Additional features include Analog and Digital Toning, Port Blink, 802.1x authentication, Remote Office Locators, and the ability to manage results via LinkWare� PC. Trustworthy Cable Testing The LIQ-100-IE is capable of measuring lengths up to 1000 feet (305 m) and provides distance to faults such as opens, shorts, and unterminated cable. Using the Industrial Ethernet Remote Adapter allows for a complete wire map of the cable pairs which helps identify miswired and split pairs on RJ45, M12X, M12D, and M8D terminated cables. The LIQ-100-IE supports EtherNet/IP, PROFINET, EtherCAT and other Industrial Ethernet protocols and qualifies the cabling bandwidth from 10BASE-T to 10GBASE-T (10 Mb/s up to 10 Gb/s). It qualifies the cabling bandwidth by taking multiple frequency-based measurements. Using IEEE-standards-based measurements ensures that tested links meet performance requirements as opposed to transmission testers which only prove that the specific test devices can communicate over the link. Necessary Network Testing Along with the robust cable testing features, the LIQ-100-IE also provides detailed information on the nearest connected switch. The LIQ-100-IE negotiates with the switch to identify the advertised data rate (up to 10GBASE-T), half/full duplex identification, the switch name, port number, and VLAN info. In-Depth PoE Testing While Power over Ethernet makes installation of devices - such as security cameras and access points - simpler, a survey by the Ethernet Alliance of over 800 installers, integrators and end users found that four of five respondents experienced difficulties in integrating PoE systems. Part of this can be traced to the fact that the IEEE offers three PoE standards, the term "PoE" is not registered, and there are a variety of non-standards-compliant implementations as well. To simplify PoE installation and troubleshooting, the LIQ-100-IE displays the pairs where power is provided, including the different power levels and pairs for dual-signature implementations. Furthermore, the LIQ-100-IE will actually place a load on the connection to ensure that the advertised power is actually being delivered by the switch across the cabling infrastructure. LinkWare� Documentation The LIQ-100-IE provides complete documentation for the tests it performs. Up to 1,000 results can be stored in the tester with descriptive names and later recalled. Test names and numbers automatically increment as each is saved ("Annex B-1", "Annex B-2", "Annex B-3", etc.) saving lots of time when testing cables in sequence. Report data may be exported to a PC for documentation purposes. The LIQ-100-IE uses LinkWare� PC, Fluke Networks' reporting software which supports a variety of testers going back 20 years and is the industry's de facto reporting solution with tens of thousands of active users. LinkWare can be used to store the results as well as generate PDF reports.Included Components1 - LinkIQ� Industrial Ethernet Cable + Network Tester with Multi-Connector Adapter and Magnetic Strap1 - RJ45 Remote-ID #11 - USB-C to USB-A Cable1 - Charging Cable1 - Cat 6A Patch Cord1 - RJ45 male to RJ45 Female Patch Cord1 - RJ45/M12X Patch Cord1 - RJ45/M12D Patch Cord1 - RJ45/M8D Patch Cord1 - RJ45/11 Modular Adapter1 - Hanging Strap with Remote ID Holder1 - Duffle Bag1 - Quick Reference GuideTerms & ConditionsPlease note estimated delivery time above. Contact us for details or if you have a delivery requirement. We ask for your patience while striving to ensure your shipment arrives quickly and accurately.Domestic ShippingFREE Standard Shipping on items OVER $75 and less than 30lbs to continental U.S. Add $36 for AK, HI, or PR. Please contact us for shipping rates to any overseas US territories including: Northern Mariana Islands, Guam, Puerto Rico, U.S. Virgin Islands and American Samoa.PO Boxes/APOs require USPS shipping and may therefore experience longer lead times6.25% Sales Tax for shipping to MAInternational ShippingDue to international voltage requirements, please ask us prior to purchasing to confirm your product will operate correctly in your country.Please contact us for shipping rates to any overseas U.S. territories.International customers are responsible for all shipping charges, including any duties or taxes.

Price: 3319.24 USD

Location: Woburn, Massachusetts

End Time: 2024-01-25T17:02:48.000Z

Shipping Cost: 0 USD