HELIX P SIX DSP ULTIMATE 6x140w 12-Ch DSP + P ONE MK2 1500w RMS @ 1-Ohm NEW

Description: HELIX COMBO HELIX P SIX DSP ULTIMATE 285w RMS per ch + 12-Channel DSPHELIX P ONE MK2 1500w RMS @ 1-Ohm Monoblock HELIX P SIX DSP ULTIMATEFeaturesUp to 285 W RMS output power per channel into 2 ΩUltra HD Class D concept – combines the high-end sound quality of Class AB technology with the benefits of Class D amplifiersTwinDSP Power – two extremely powerful “fixed point” Audio DSPs with 64 Bit resolution and 2.4 billion MAC operations per secondA/D and D/A signal converters from BurrBrownVCP (Virtual Channel Processing) allows even more flexible configuration for highly complex sound systemsACO – Advanced CoProcessor for extended feature setISA (Input Signal Analyzer) and InputEQ for easy analysis and compensation of input signalsProprietary TuneEQ function for automated adjustment of the output equalizersSFX (DSP Sound Effects) – Augmented Bass Processing, RealCenter & Co.High power 6-channel highlevel input with up to 32 V RMS input sensitivity and ADEP.3 circuitOptical (max. 96 kHz) and coaxial (max. 192 kHz) digital input in SPDIF formatFour RCA / Cinch outputs with max. 3 Volts output voltageOptical digital output in SPDIF format (96 kHz)Compact, future-proof Smart Control Port (SCP) for connecting remote controls and accessoriesHEC slot for system expansions like Bluetooth® HD Audio Streaming, High Resolution Audio Streaming via USB etc.Automatic Remote switchStart-Stop capability down to 6V supply voltageVery compact design with low heat dissipation thanks to extraordinary efficiencyTechnical data Power RMS ≤ 1% THD+N - @ 4 OhmsChannel A - F: 6 x 120 Watts - @ 2 OhmsChannel C - F: 4 x 230 Watts - @ 1 Ohm- - bridged @ 4 Ohms- - bridged @ 2 Ohms- Max. output power per channel*Channel A - F: up to 145 Watts RMS @ 4 OhmsChannel C - F: up to 285 Watts RMS @ 2 OhmsAmplifier technologyUltra HD Class DInputs6 x RCA / Cinch6 x Highlevel speaker input1 x Optical SPDIF (12 - 96 kHz)1 x Coax SPDIF (12 - 192 kHz)1 x Remote InInput sensitivityRCA / Cinch 1 - 4 Volts or 4 - 8 VoltsHighlevel 4 - 16 Volts or 8 - 32 VoltsInput impedance RCA / Cinch13 kOhmsInput impedance highlevel9 - 33 Ohms with ADEP.3Outputs6 x Speaker output4 x RCA / Cinch1 x Optical SPDIF (96 kHz)2 x Remote OutOutput voltage RCA / Cinch3 VoltsFrequency response10 Hz - 44,000 HzDSP resolution64 BitDSP power2 x 295 MHz (2.4 billion MAC operations/second)Sampling rate96 kHzDSP type2 x Audio signal processorSignal convertersA/D: BurrBrownD/A: BurrBrownSignal-to-noise ratio digital input108 dB (A-weighted)Signal-to-noise ration analog input102 dB (A-weighted)Distortion (THD)< 0,004 %Damping factor> 100Operating voltage10.5 - 32 Volts (max. 5 sec.down to 6 Volts)Power ratingDC 12 / 24 V ⎓ 65 A max.Idle current1350 mAMax. remote output current500 mAOperating temperature range-40° C to +70° CFuse3 x 20 A LP-Mini-fuse (APS)Additional features32 Bit CoProcessor, HEC slot, ADEP circuit, Auto Remote switch, Smart Control PortDimensions (H x W x D)50 x 260 x 190 mm /1.97 x 10.24 x 7.48“* In typical multi-channel applications (2- / 3-way system + rear + subwoofer)HELIX P ONE MK2Features High performance Class D mono amplifier with up to 1,800 Watts RMS @ 1 Ohm – a perfect match for all 2 x 2 Ohms subwoofers connected in parallelHigh-res capability thanks to an extended audio frequency response of over 40 kHz for unsurpassed sound qualityExtremely high efficiency and low heat dissipation with minimal dimensionsHigh damping factor for maximum speaker controlDigital, optical signal input in SPDIF format including SPDIF Direct In switch for routing the digital input signal directly and losslessly to the power stageBurrBrown D/A signal converter of the latest generation with a resolution of 32 BitSwitchable Subsonic filterRegulated power supply with Start-Stop capability for extremely stable output power even during voltage dropsSMD (Surface Mounted Device) manufacturing technology combines minimum space requirement with maximum reliabilityInput Mode switch to adapt the amplifier to the input signalPerfectly combinable with HELIX P SIX DSP ULTIMATE amplifierTechnical data Power RMS ≤ 1% THD+N - @ 4 Ohms1 x 500 Watts - @ 2 Ohms1 x 880 Watts - @ 1 Ohm1 x 1,500 Watts - bridged @ 4 Ohms- - bridged @ 2 Ohms- Max. output power per channel*Up to 1.800 Watts RMS @ 1 OhmsAmplifier technologyClass DInputs2 x RCA / Cinch1 x Remote In1 x Optical SPDIF (28 - 96 kHz) Input sensitivityRCA / Cinch 0.5 - 8 VoltsInput impedance RCA / Cinch20 kOhmsInput impedance highlevel-Outputs1 x Speaker outputOutput voltage RCA / Cinch- Signal converter for digital inputBurrBrown 32 Bit DA converterFrequency response21 Hz - 40,000 HzBass boost-Highpass-Lowpass-Bandpass-Subsonic21 Hz Phase- Slope high- / lowpass-Slope subsonic / lowpassButterworth 48 dB/Oct.Signal-to-noise ratio digital input110 dB (A-weighted)Signal-to-noise ratio analog input110 dB (A-weighted)Distortion (THD)< 0.01 %Damping factor> 450Operating voltage10.5 - 17 Volts (max. 5 sec. down to 6 Volts)Idle current1500 mAOperating temperature range-40° C to +70° CFuse4 x 30 A LP-Mini-fuse (APS)Power ratingDC 12 V ⎓ 160 A max.Additional featuresInput mode switch, SPDIF Direct In switch, Start-Stop capabilityDimensions (H x W x D)50 x 260 x 190 mm /1.97 x 10.24 x 7.48”* In typical applications as subwoofer amplifier

Price: 2999 USD

Location: Yakima, Washington

End Time: 2024-09-17T18:36:53.000Z

Shipping Cost: N/A USD